Starting Operation
- The dust extractor must not be used without a filter.
- Do not use damaged filters (e.g. no cracks, small holes, etc.). Replace any damaged filters immediately.
- Before extraction, ensure that the filter unit is securely fitted.
- Before extraction, ensure that the battery compartment cover is securely closed.
- Please inform yourself about the applicable regulations/laws on how to handle harmful types of dust in your country.
The dust extractor may be used for vacuuming and extracting the following materials:
- Dusts with an exposure limit of > 1 mg/m3
The dust extractor must categorically not be used in potentially explosive areas.
The use of a fleece filter bag (26) is recommended.
Switching On and Off
To switch on the dust extractor, press the on/off switch (4) depending on the required power setting:
- Press the on/off switch (4) for work with medium suction/blowing power and for a longer battery life in position I (e.g. for vacuuming smooth surfaces, vacuuming power tools with a low level of dust generation or for blowing clear dirty surfaces).
- Press the on/off switch (4)for work with high suction/blowing power in position II (e.g. for vacuuming carpets or power tools with a high level of dust generation).
To switch off the dust extractor, press the on/off switch (4) to the centre position.